grid current meaning in Hindi

Examples

1. If grid current is not permitted to flow, the class is AB 1.
2. This impedance will be determined by the grid current in Class C or AB2 operation.
3. Gas and ions within the tube contribute to grid current which can disturb operation of a vacuum tube circuit.
4. If grid current is allowed to flow ( adding more distortion, but giving slightly higher output power ) the class is AB 2.
5. This design uses a triode, the grid current drawn in this system is larger than that required for the other two basic designs.
6. Grid currents can place extreme demands on the driving circuitry, sometimes requiring as much as 8 watts input for larger tubes such as the 211.
7. Some of these valves use aligned grids to minimise grid current and beam plates instead of a third grid, these are known as " beam tetrodes ".
8. One potential disadvantage of the grid leak detector is that the input impedance of the detector may be affected by the need to self bias the detector tube with grid current.
9. Amplitude distortion in a class A triode stage can be small if care is taken to prevent the anode current from becoming too small and ensuring that grid current does not flow at any point.
10. The principle of the DFIG is that rotor windings are connected to the grid via slip rings and back-to-back voltage source converter that controls both the rotor and the grid currents.